4 results

Safeguarding our Sydney Rock Oyster industry against QX disease

Project number: 2022-191
Project Status:
Current
Budget expenditure: $200,000.00
Principal Investigator: Cheryl Jenkins
Organisation: Department of Primary Industries and Regional Development (NSW)
Project start/end date: 7 Dec 2023 - 6 Nov 2025
Contact:
FRDC

Need

Outbreaks of QX disease in Port Stephens in 2022 and 2023 mark the continued spread of this disease into Sydney rock oyster (SRO)-producing estuaries in NSW and QLD over the last 50 years. In severe years, QX can cause up to 90% mortalities in affected stock, therefore this disease poses a major threat to an industry that is of substantial economic, historic and cultural value.
Despite the apparent presence of the causative agent (M. sydneyi) in nearly all estuaries undertaking SRO production, disease only occurs in some, and biosecurity protocols further complicate SRO farming as stocks from high-risk estuaries cannot be moved into estuaries that have a lower QX disease risk profile.

Reasons behind the expression of QX disease in some estuaries but not others currently remain unknown. In France, a related parasite, M. refringens, was originally thought to be a widespread cause of marteiliosis in the European flat oyster (Ostrea edulis) as well as mussels belonging to the genus Mytilus. M. refringens O (oyster) type and M (mussel) type, which were originally described due their differential pathogenicities in the respective hosts, have more recently been found to constitute separate species, with M type being renamed as Marteilia pararefringens. A similar situation may exist in Australia with M. sydneyi constituting more than one species and with the more pathogenic strains being responsible for QX disease outbreaks. Historically these questions could not be meaningfully answered due a lack of genetic information about M. sydneyi; however NSW DPI has recently undertaken a genome sequencing project on M. sydneyi that can facilitate strain comparison. Therefore, one aim of this project is to characterise Marteilia strains from estuaries where disease occurs, and compare with those from estuaries where disease does not occur, to better inform biosecurity policies. If the M. sydneyi strains are identical across estuaries, then this may enable biosecurity policy to be modified to allow oyster translocations across so called “high” and “low” risk estuaries. However, if strains do differ across high and low risk estuaries, then any biosecurity policy will be aimed at protecting estuaries not currently experiencing QX outbreaks from the introduction of high pathogenicity strains.

QX disease remains as the primary known threat for SRO production. Due to significant knowledge gaps in how this disease is transmitted, the use of selectively bred QX resistant oysters is the main management tool used to enable cultivation to continue in estuaries where the disease is enzootic. QX survival is a quantitative and a responsive trait where applied breeding offers a good solution to increase QX survival with significant economic benefits for industry. QX survival breeding is reliant on field challenges however, this method works well to increase resistance. Best results for improving QX survival are achieved through a combination of breeding and management practices to minimise impacts. It is recommended to use oysters selected for QX survival as a risk management strategy to reduce stock losses before a QX disease outbreak occurs in an estuary. When oysters selected for QX survival are used in estuaries affected by QX, it is important to deploy spat when M. sydneyi infections have ceased and harvest these oysters prior to a second disease exposure. This relies on specific timing of commercial hatchery production and fast oyster growth which is a trait under selection in combination with QX survival. Field exposures that run over two seasons of QX disease are now used to increase survival following consecutive outbreaks. Other diseases or factors that compromise SRO health prior to or during M. sydneyi infections also reduce the effectiveness of breeding.

Increasing genetic gains for QX survival has been the primary objective of the breeding program since its inception. A genomics project is currently underway which aims to identify genetic markers for QX disease resistance to increase genetic progress for this trait. Batches of Richmond River Rock oyster (RRRO) produced by NSW DPI have shown high levels of of QX disease survival. Prior studies on RRROs suggest that genetically they are classified as SROs but they appear to have developed significant resistance, presumably due to years of exposure to QX in the Richmond River estuary where the disease in enzootic. Preliminary experimental evidence suggests that RRROs display enhanced survival when exposed to QX disease, justifying their inclusion in the selective breeding program. Therefore, the second aim of this project is to assess QX survival of current RRRO families across multiple years of QX exposure and compare these results to other QX-resistant families in the breeding program. This information will be used in this project to formulate a breeding plan to create additional families using batches of RRROs that have been assessed for QX survival.

Objectives

1. To use previously generated genomic data from M. sydneyi to develop a multilocus sequence typing scheme for Marteilia strains from SROs
2. To screen samples collected from low-risk estuaries for M. sydneyi using qPCR
3. To compare Marteilia MLST profiles of qPCR positive samples from low-risk estuaries with those from M. sydneyi MLST profiles from high-risk estuaries.
4. To create 10 additional families (in addition to the families produced for the 2023 year class breeding run) that have a parent sourced from the Richmond River
5. To assess the QX survival of the 10 additional 2023 year class families as spat, adults and over two seasons at multiple sites
6. To generate QX spat survival estimated breeding values (EBVs) for families with RRRO parents produced for the YC2022 and 2023 year classes
7. To collect performance data (QX survival and growth) that allows comparison of RRROs and commercial families from the Sydney Rock Oyster breeding program over two consecutive seasons of QX disease.
Industry
PROJECT NUMBER • 2021-129
PROJECT STATUS:
COMPLETED

Understanding of spatial extent, infection window and potential alternative hosts for the oyster disease QX in Port Stephens

This report details an investigation by the NSW Department of Primary Industries into QX disease in Sydney Rock Oysters (Saccostrea glomerata; SROs) in Port Stephens during the 2022. This followed from the first incursion of this disease in this estuary in August of 2021. QX disease has...
ORGANISATION:
Department of Primary Industries and Regional Development (NSW)

Future oysters CRC-P: New Technologies to Improve Sydney Rock Oyster Breeding and Production

Project number: 2016-803
Project Status:
Completed
Budget expenditure: $204,066.69
Principal Investigator: Michael Dove
Organisation: Department of Primary Industries and Regional Development (NSW)
Project start/end date: 29 Sep 2016 - 30 Aug 2019
Contact:
FRDC

Need

The hatchery sector for SRO is still developing and any assistance with its underlying operating challenges or potential increases to its seed market significantly improve the prospects for its continued development.

Tetraploid SRO: Triploid SRO can grow up to 30% faster than normal SRO and commonly have a significantly longer marketability window. Accordingly, many framers have eagerly awaited the supply of more triploid seed. In order for this to occur new techniques that overcome the shortcomings of direct induction are required - techniques that don't involve the direct application of harmful chemicals to what will eventually be a foodstuff.

Gamete preservation: Currently techniques for strip spawning SRO gametes typically results in the destruction of valuable broodstock and the collection of many more gametes than are required immediately. The capacity to simply and cheaply store gametes for relatively short periods of time offers a number of advantages. Once the hatchery operator is satisfied with the performance of gametes (usually apparent within hours to days) gametes could be shared with other hatcheries. This is particularly valuable where brood stock are scarce because of time of year or they are from a limited population in a breeding program. If problems occur, stored gametes could be used to commence a second batch without the need to continue to hold and feed broodstock, or to recreate a particular cross (or new crosses) within a breeding program.

Maturation: SRO broodstock can take up to 10 weeks to bring into condition within a hatchery and can consume up to 80% of the algae required for a hatchery production run - this is both time consuming and expensive. Technology that accelerates reproductive condition and then stimulates spawning on demand could significantly reduce these costs.

Objectives

1. 20% of industry with access to triploid SRO
2. Reduce complete hatchery operation costs by 15% through a reduction in time for oyster conditioning
3. Increase SRO breeding program reliability

Final report

ISBN: 978-1-76058-361-3
Authors: Michael Dove (NSW DPI) Saowaros Suwansa-ard (USC) Abigail Elizur (USC) Rebecca Seeto (UoN) John Clulow (UoN) Zamira Gibb (UoN) Tomer Abramov (USC) Stephan O’Connor (NSW DPI) Greg Kent (NSW DPI) Wayne O’Connor (NSW DPI)
Final Report • 2020-01-01 • 5.88 MB
2016-803-DLD.pdf

Summary

Hatchery production of Sydney Rock Oysters (SROs, Saccostrea glomerata) is a costly and high risk activity for the breeding program and industry exacerbated by factors such as: reliance on hatchery conditioning, low fertilisation success using strip-spawned gametes, extended larval rearing period compared to Pacific Oysters (Crassostrea gigas), and variable settlement rates. This project, one of a number that comprised the Future Oysters Coopoerative Research Centre project (Future Oysters CRC-P), was developed through discussions with the SRO industry hatchery sector and was designed to target specific hatchery production challenges.
Industry
PROJECT NUMBER • 2016-802
PROJECT STATUS:
COMPLETED

Future Oysters CRC-P: Accelerated Sydney Rock Oyster (SRO) Breeding Research

This project focussed on increasing genetic resistance of Select Oyster Company (SOCo) breeding program Sydney rock oyster (Saccostrea glomerata, SRO) families to QX disease and winter mortality (WM) disease. NSW DPI has worked collaboratively with SOCo to develop a SRO family-based breeding program...
ORGANISATION:
Department of Primary Industries and Regional Development (NSW)