5 results
Industry
Adoption
Industry
PROJECT NUMBER • 2022-205
PROJECT STATUS:
COMPLETED

Pathways and opportunities to reduce the carbon footprint of the Australian prawn farming industry

This report provides an updated assessment of the carbon footprint of farmed prawns in Australia, building upon the foundation laid by previous projects (FRDC Project 2020-089), which focused on the overall carbon footprint of the fisheries and aquaculture sector. This project involves a...
ORGANISATION:
Blueshift Consulting
TAGS
Sustainability
Energy
Energy
Aquaculture
SPECIES
Black Tiger Prawn

Bringing the iconic Australian Herring (Arripis georgianus) to the food service and retail market – phase one

Project number: 2022-166
Project Status:
Current
Budget expenditure: $70,000.00
Principal Investigator: Robert A. Bell
Organisation: Blueshift Consulting
Project start/end date: 30 Apr 2023 - 9 Jun 2024
Contact:
FRDC
TAGS
Underutilised
Rac Wa
Post Harvest
Consumer
SPECIES
Australian Herring

Need

This Australian Herring FRDC project is a strategic initiative to promote the recently recovered commercial Herring fishery. Blueshift and the commercial sector – represented by Fins Seafood and Albany Seafoods, are strong supporters of benefiting the commercial herring industry through increased demand and production. Fins Seafood focus on locally sourced seafood and have the experience and are passionate in this area, solidifying their undeniable importance to be a part of this project.

The project is needed to reaffirm the presence Australian Herring within the seafood market as commercial landings increase over the coming decade. If Australian Herring is successfully marketed, there is a potential for success within the local domestic market and potentially for export, if export approval is granted by the Australian Government. Furthermore, it is designed to address these challenges by providing investment for research, development, and extension initiatives aimed at improving the sustainability and profitability of the Australian Herring fishery. If successful, this proposal aims to obtain an accurate sense of the market appetite and consumer demand, as well as the potential to value-add by using local seafood processors.

Effective marketing through potential branding, introduction of new products and developing the presence of Australian Herring locally will be beneficial to industry and consumers. Furthermore, successful utilisation of all associated fish waste will bring more value and benefit to industry.

Objectives

1. Identification of the current market demand and future demand forecasts for Australian Herring.
2. Transition Australian Herring from bait to the higher-value human consumption market.
3. Development of three value-add Australian Herring products.
4. Identification of methods of full utilisation of Australian Herring waste products.
5. Development of effective market strategies to introduce value-add Australian Herring products to the retail market.

Energy use and carbon emissions assessments in the Australian fishing and aquaculture sectors: Audit, self-assessment and guidance tools for footprint reduction

Project number: 2020-089
Project Status:
Completed
Budget expenditure: $98,500.00
Principal Investigator: Robert A. Bell
Organisation: Blueshift Consulting
Project start/end date: 21 Feb 2021 - 23 Jul 2021
Contact:
FRDC
TAGS
Efficiency
Climate Change

Need

As identified in the EOI scope and from previous FRDC and other research, there are multiple needs for further information on energy use and greenhouse gas (GHG) emissions in the Australian fisheries and aquaculture sectors (F&A).
Firstly, at the top-level, a national account of these sector’s performance is necessary to provide a clear determination of the overall F&A contribution within the Agriculture, Forestry & Fishing Industry classification (AFF Industry) classification within National Inventory Data. The AFF Industry is second largest emissions sector and there is a need to disaggregate the F&A sector from the broader agricultural data, and to also develop industry baselines against which further performance can be measured (and potentially benchmarked against other sectors).
Second, there is a need for sub-sectors (specific managed fisheries or industry groups) as well as individual companies to be able measure, assess and then potentially manage their own energy use and emissions.
Finally, once companies, subsectors and the F&A sectors have data, there is a need for education and tools to assist them to improve energy efficiency and profitability, lower emissions and related risks but also importantly how to create positive engagement with stakeholders, particularly customers becoming more discerning in product selection based on carbon footprint, to maintain competitiveness in consumer protein selection decision-making.

Objectives

1. Program 1: Establish energy use and GHG profile of Australian F&A sectors
2. Program 2: Develop and self-assessment tool for Australian F&A sectors energy efficiency and GHG
3. Program 3: Develop a toolbox and examples for emissions reduction opportunities in the fisheries & aquaculture sectors

Final report

ISBN: 978-0-646-86114-2
Author: Robert A. Bell
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.

Project products

Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
Final Report • 2022-05-31 • 2.58 MB
2020-089_DLD.pdf

Summary

This project is the first examination of the total carbon emissions of the Australian fishing and aquaculture (F&A) sectors and component seafood production industries. To date, some work had been done on energy consumption and efficiency improvements, but the carbon emissions of the Australian F&A sectors had never been calculated.
 
In Australia’s National Greenhouse Accounts, emissions from the F&A sectors are currently included within the aggregated ‘agriculture, forestry and fishing’ segment. This segment is the third largest in Australia’s inventory, and the ‘fishing industry’ data is overwhelmed within the large, aggregated datasets of these combined sectors and therefore often unintentionally overlooked.
 
However, measuring the carbon footprint of the F&A sectors was a complicated task that required an account of all the emissions generated directly and indirectly by the sectors. This included fuel burnt directly to power fishing vessels, to purchased electricity, refrigeration emissions and the emissions from services and products bought from external suppliers such as bait and aquaculture feed. The study measured the carbon emissions and energy use of Australia’s largest F&A producer industries, which together constitute about 82% of Australia’s domestic seafood production by gross value of production (GVP). While some of the other industries that make supply chain inputs to the F&A sectors are discussed (such as aquaculture feeds and fishing bait), the project focus is on the Australian seafood primary producers.
 
The information is a vital step in providing a competitive advantage for seafood as a low- emissions protein. Seafood consumers are increasingly wanting to know the stories behind the products they’re buying, including efforts by fishers and farmers to reduce their carbon footprint. It also highlights how seafood production may need to adapt in the future. 
 
As part of the project work, three GHG emissions calculator tools were developed to help fishers and farmers better understand what drives their GHG emissions and how to measure them. And once they have been measured, what can be done to better manage emissions, and utilise the information in their operations and customer discussions.
 
The project has identified five recommendations and opportunities for government departments and agencies to update and improve their GHG emissions reporting methodologies for the fishing and aquaculture sectors.
Technology • 2022-05-31 • 1.81 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Offshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.80 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Aquaculture_Onshore_Tool_v1.0.xlsx
Technology • 2022-05-31 • 1.88 MB
2020-089_Greenhouse Gases Emissions Calculator Tool_Fisheries_Tool_v1.0.xlsx
View Filter

Research

Category

Species

Organisation