229 results
Environment
PROJECT NUMBER • 2018-159
PROJECT STATUS:
COMPLETED

Spawning biomass of Jack Mackerel (Trachurus declivis) in the East sub-area of the Small Pelagic Fishery during summer 2019

Estimates of spawning biomass obtained using the Daily Egg Production Method (DEPM) are the primary biological performance indicator for quota species in the Small Pelagic Fishery (SPF). The objective of this study was to conduct ichthyoplankton and adult trawl surveys that underpin the DEPM in the...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Survey
Stock Assessment
Responsible Fishing
Reproduction
Rac Cmwth
SPECIES
Mackerels
Adoption
PROJECT NUMBER • 2018-127
PROJECT STATUS:
COMPLETED

Validation and implementation of rapid test kits for detection of OsHV-1

Following the outbreak of Pacific Oyster Mortality Syndrome (POMS) in the Port River, South Australia in summer 2017-18, a need was identified for rapid diagnostic technology for OsHV-1, the causative agent of POMS. During the February 2016 OsHV-1 outbreak in Tasmania, tracing activities in...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Fisheries Management
Disease
Diagnostic
Biosecurity
SPECIES
Pacific Oyster
Industry
Industry
PROJECT NUMBER • 2018-004
PROJECT STATUS:
COMPLETED

SafeFish 2018-2021

SafeFish is an initiative that was developed by the South Australian Research and Development Institute (SARDI) in 2010 (Project 2010-752-10: SafeFish - Seafood Trade Expert Panel funded by the Australian Seafood CRC until 2015). Following this, the Fisheries Research and Development Corporation...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Trade
Rac Wa
Rac Vic
Rac Tas
Rac Sa
Industry
PROJECT NUMBER • 2017-225
PROJECT STATUS:
COMPLETED

Improving risk management of paralytic shellfish toxins (PST) in the Blacklip Abalone (Haliotis rubra rubra)

The accumulation of paralytic shellfish toxins (PST) of microalgal origin in abalone tissues causes a trade and human health risk that requires active management. Toxic algal blooms of the genus Alexandrium have recently caused several abalone harvest closures on the east coast of Australia. Risk...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Toxin
Food Safety
Fisheries Management
Consumer Health
SPECIES
Blacklip Abalone

Assess new technologies and techniques that could improve the cost-effectiveness and robustness of recreational fishing surveys

Project number: 2017-198
Project Status:
Completed
Budget expenditure: $38,370.00
Principal Investigator: Mike A. Steer
Organisation: SARDI Food Safety and Innovation
Project start/end date: 1 Jul 2018 - 30 Aug 2018
Contact:
FRDC
TAGS
Survey
Stakeholder
Recreational Fishing
Rac Wa
Rac Vic

Need

It is proposed that a national workshop is needed to: (1) explore options to improve the precision and cost-effectiveness of recreational fishing surveys; (2) consider the use of emerging technologies to support recreational fisheries science; and (3) identify engagement strategies.

Although all States are expected to benefit from the outcomes of the proposed workshop, South Australia is particularly reliant on the shared expertise, transfer of knowledge and advice regarding the execution of scientifically robust, routine recreational fishing surveys. The South Australian Government is committed to undertaking a recreational fishing survey every five years. All previous surveys have been carried out by interstate experts, however, there is a commitment by PIRSA/SARDI to develop recreational fisheries science capability at a sufficient level to undertake all future State-based surveys. It is expected that the workshop will establish South Australia’s role as an active participant in the national assessment of recreational fisheries, increase data harmonisation opportunities across the jurisdictions, and contribute in advancing recreational fisheries science.

Objectives

1. Identify options to improve the precision and cost-effectiveness of recreational fishing surveys
2. Identify strategies that positively engage the recreational sector in fisheries science and management.
3. Assess whether emerging surveillance technology can be feasibly integrated into future surveys.

Final report

ISBN: 978-1-876007-13-3
Author: Dr. Mike Steer
Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Final Report • 2019-03-21 • 4.52 MB
2017-198-DLD.pdf

Summary

Currently, the most significant gap in our knowledge in assessing the status of community-shared fisheries is determining the relative contribution by the recreational sector. To explore this issue, a two-day national workshop was held from 10-12 July 2018 at the South Australian Research and Development Institute (SARDI). The key focus was advancing the ‘best practice’ approach in design, execution, and analysis of recreational fishing surveys as described in Georgeson et al. (2015; FRDC 2007-014). This project also builds on recent work by Griffiths et al. (2014; FRDC 2011-036) and Moore et al. (2015; FRDC 2012-022.20). The overarching aim of this workshop was to assess the usefulness of new technologies and techniques for enhancing the cost-effectiveness and reliability of recreational fishing surveys. The attendees included recreational fisheries scientists, managers, a national peak body representative, an international expert, representatives from Deckhand© and a Fisheries Research and Development Corporation (FRDC) representative. 

The specific objectives of the workshop were to:

1. explore options to improve the precision and cost-effectiveness of recreational fishing surveys;

2. assess whether emerging technologies can be feasibly integrated into future surveys; and

3. identify strategies that positively engage the recreational sector in fisheries science and management.

Industry
Environment
PROJECT NUMBER • 2017-051
PROJECT STATUS:
COMPLETED

Seafood CRC: Extending biotoxin capability and research in Australia through development of an experimental biotoxin contamination facility to target industry relevant issues

A short-term experimental biotoxin contamination facility was set up at Roseworthy, South Australia, to examine the uptake and depuration of marine biotoxins from one of the most toxic dinoflagellates known, Alexandrium catenella. Over the period of one year, SARDI’s Seafood Food Safety group...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Modelling
Innovation
Health And Safety
Fisheries Management
SPECIES
Tropical Abalone
Southern Rock Lobster
Blacklip Abalone
Roe's Abalone
Greenlip Abalone
Environment
PROJECT NUMBER • 2017-027
PROJECT STATUS:
COMPLETED

Validating a new sampling technique for estimating egg production

Estimates of spawning biomass obtained using the Daily Egg Production Method (DEPM) are the primary biological performance indicator in the South Australian Sardine Fishery (SASF) and Commonwealth Small Pelagic Fishery (SPF). The DEPM is also being used to assess the status of other...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Sustainability
Stock Assessment
Reproduction
Rac Sa
Fisheries Management
SPECIES
Blue Mackerel
Pilchards
Environment
PROJECT NUMBER • 2017-023
PROJECT STATUS:
COMPLETED

ESD risk assessment for under-utilised species to facilitate structural reform of South Australia's commercial Marine Scalefish Fishery

South Australia’s Marine Scalefish Fishery (MSF) is facing a number of complex issues that are affecting business profitability and stock sustainability. One particular issue relates to the long-term reliance of the fishery on the three primary finfish species of King George Whiting, Snapper...
ORGANISATION:
SARDI Food Safety and Innovation
TAGS
Underutilised
Sustainability
Stock Assessment
Rac Sa
Profitability
SPECIES
Snapper
King George Whiting
Southern Garfish
Southern Calamari
Whitings
View Filter

Research

Category

Species

Organisation