Australia’s fisheries span a large area of ocean. Australia has the world’s third largest Exclusive Economic Zone (EEZ), with an area of over 8 million km2. This zone contains mainly Commonwealth managed fisheries, with State jurisdictions mainly in coastal waters up to the 3 nautical mile limit. Australia's total wild-catch fisheries gross value of production is $1.6 billion, of which 28% is from Commonwealth fisheries and 72% from the smaller coastal inshore fisheries managed by state jurisdictions. The wildcatch fisheries sector employs about 10,000 people across Australia (https://www.awe.gov.au/abares/research-topics/fisheries/fisheries-and-aquaculture-statistics/employment).

The commercial fishing industry has a network of thousands of vessels working mainly in inshore waters around Australia. They can supply a potential platform for extensive and fine scale spatial and temporal monitoring of the waters of the continental shelf (0-1200m), from the surface to the ocean floor. Given that their livelihoods depend on it, they have a keen understanding of oceanographic conditions with respect to fish behaviour, feeding and spawning and the various oceanographic factors that may influence this. In some fisheries (e.g. surface tuna longlining), fishers eagerly seek and use readily available fine-scale oceanographic data such as sea surface temperature and sea level, to improve their targeting and achieve higher resultant catch rates. For many other fisheries, however, it is the fine-scale sub-surface oceanographic conditions (feed layers, thermoclines, temperature at depth etc) that have a critical influence on their fishing dynamics. Unfortunately, this type of oceanographic data is far less readily available. Although fishers and scientists know these factors are important, the time series of fine scale spatial and temporal data relevant to fishery operations is not available to include in stock assessments. As a result, it is often assumed that variations in catch rates reflect changing stock abundance, when it may simply be a result of changing oceanographic conditions.

Marine scientists collect a vast range of oceanographic data using satellites, subsurface drones, and static and drifting buoys. Sea surface data, however, is much easier and more cost-effective to collect at high spatial and temporal resolutions than sub-surface data. Hence, understanding of sub-surface oceanographic conditions tends to be derived from modelling more than actual measurement. This may be sufficient at a wide-scale global or continental level, but it is not adequate at the fine-scale spatial and temporal resolution required for fisheries management.

The use of commercial fishing gear as a research data platform has been increasing in popularity internationally (https://www.frontiersin.org/articles/10.3389/fmars.2020.485512/full). A number of groups in Europe have been doing this for a decade (e.g Martinelli et al 2016), and New Zealand are also now involved (https://www.moanaproject.org/te-tiro-moana). However, this approach has yet to be implemented in Australia in a coordinated way. In particular, our approach dictates open access data served through the IMOS Australian Ocean Data Network (www.aodn.org.au) that can be collected once and used many times.

In this project we intend to instrument seafood sector assets (e.g Trawl Nets, longlines, pots) with fit-for- purpose quality-controlled (QC'd) temperature/pressure sensors to increase the sub-surface temperature data coverage around Australia’s shelf and upper slope regions (0-800m) at low cost. Not only will this assist in the collection of data at relevant spatial and temporal scales for use by fishers, but it will also provide a far more extensive level of QC’d data to oceanographers in near real time (NRT) for evaluation and ingestion into data-assimilating coastal models that will provide improved analysis and forecasts of oceanic conditions. In turn, this will also be of value to the fishing sector when used to standardise stock assessments.

Martinelli, M., Guicciardi, S., Penna, P., Belardinelli, A., Croci, C., Domenichetti, F., et al. (2016). Evaluation of the oceanographic measurement accuracy of different commercial sensors to be used on fishing gears. Ocean Eng. 111, 22–33. doi: 10.1016/J.OCEANENG.2015.10.037

The project aligns with FRDC outcomes and enabling strategies – building capability and capacity (4); and provide foundational information and support services (5). and outcomes addressing a culture that is inclusive and forward thinking (3): community trust, respect and value (5); growth for enduring prosperity (1) and best practices and production systems (2)

Whilst resources throughout the recreational fishing sector exist, there is a gap for learning materials that are structured to enable learning – often content does not consider learning outcomes, the sequence or activities necessary to learn and apply, or mechanisms to assess and recognise competency. There is also a gap in learning that specifically targets adults — with a recruitment focus of women and breaking down perceived barriers to entry — with a holistic approach that can take one from beginner to competent and well-versed angler.

Developing such a course will:
- Break down perceived barriers to entry for women into recreational fishing
- Facilitate a measurable, fast-tracked, capability-based journey into recreational fishing
- Establish and provide a gateway into other opportunities in fishing and aquaculture through recreational fishing
- Contribute to increasing the percentage of positive and collaborative individuals in the recreational fishing community through developing capability and capacity build a database of enthusiastic recreational fishers and their competencies

This course will actively work to increase the economic throughput of the recreational fishing sector by breaking down the barriers-to-entry for a vast and largely untapped segment of the market (women), which has the parallel benefit of shifting the perceived value of recreational fishing as a lifestyle, thus increasing the household investment in the activity.

The course intends to inspire a fresh generation of thought-leaders in the recreational fishing community, enabling a broad appreciation of the interplay of layers that influence and impact positive fishing experiences and a robust fishery.

Building on the circularity discussions and work being undertaken by FRDC and the industry, this project seeks to undertake the legwork required to establish a nationwide on-demand End of life (EOL) fishing gear recovery system for Australia and pilot it in key locations. The materials that many nets and ropes are made of are highly valuable and recyclable and in fact in many other countries, is already being recycled or remanufactured. Until now, having a national system has been cost prohibitive due to the large distances and need for economies of scale and limited local buyer interest. As a part of the national targets set by the Australian Government relating to plastics use and recycling, commercial fishing and aquaculture sectors have been exploring how to move to a circular economy model and reduce plastic inputs through a variety of projects run by FRDC and others. However, with fishing gear the biggest plastic polymer input, and contamination challenges, there has yet to be a suitable system established.

This project seeks to enable the opportunities that addressing EOL gear provides in Australia to the commercial fishing and aquaculture sector through the establishment of an effective EOL fishing gear recovery system for the country to reduce the landfill costs to industry. It seeks to build on the learnings from previous projects as well as the ten years of experience of our partner Bureo has in in operating an EOL fishing gear recovery program. Bureo currently have an EOL gear recovery system active in 9 countries.

The key objectives are:
● By the end of 2026 there is an effective end-of-life fishing/aquaculture gear recovery system implemented across key fishing ports, and key aquaculture centres benefiting regional communities and fisheries conservation and assisting the Australian Government to address plastic recovery/recycling targets.
● By the end of 2024, the enabling environment for an effective and fit for purpose EOL fishing/aquaculture gear recovery system is in place within Australia, with commencement of recycling underway in key pilot locations.