3 results
Industry
Industry

Developing Code of Practice frameworks and assessing the need for an Australian Standard on Responsible Fishing Practices

Project number: 2013-023.20
Project Status:
Completed
Budget expenditure: $154,475.00
Principal Investigator: Sevaly Sen
Organisation: Sevaly Sen
Project start/end date: 29 Nov 2013 - 29 Apr 2015
Contact:
FRDC
TAGS
Sustainability
Responsible Fishing
Health And Safety
Food Safety
Fisheries Management

Need

A recent FRDC report on Community Perceptions of the Australian Fishing Industry (2011) identified that only 27 percent of those surveyed believe that commercial fishing is sustainable - a similar result was found in surveys in 2003. This finding reflects very poorly on commercial fishing despite the considerable resources that have been invested over the past decade on changes to fishing and management practices. It is evident that consumersc remain largely unaware of the significant progress that has been made. This project will address an element of these consumer concerns about Australian fishers, responsibly fishing.

Consumers need to be able to justify support for the Australian fishers through a framework they recognise, such as a benchmark standard. A core problem is that most sectors of the commercial fishing industry do not have an appropriate framework under which they can promote their responsible fishing practices to consumers. The current mechanisms are fragmented and wide ranging which is confusing for the fishers. In addition, the cost associated with many of the higher level certification schemes are beyond the capacity of many fishery sectors, particularly the smaller inshore sectors. This project provides the extension and adoption framework to resolve this problem at the fishery sector, regional or at individual fisher level - no other scheme offers this breadth of scope. It is envisiaged that this will be a low cost initiative affordable by industry

This Draft Australian Standard is intended to be used as a basis for a certification scheme of individual operators and link to a future Chain of Custody Australian Standard which will go beyond resale.

This project will also deliver the required extension and adoption of many other previous investments by FRDC, in particular, industry codes of practice and ESD initiatives.

Objectives

1. To assess existing industry Codes of Practice and EMS's that relate to responsible fishing practices, workplace health and safety, food safety, EMS and good handling practices for relevance and applicability against domestic regulatory frameworks, the FAO code of Conduct and any other applicable codes.

Final report

ISBN: 978-0-6480476-1-2
Author: Sevaly Sen
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
Final Report • 2020-12-01 • 5.84 MB
2013-023.20-DLD.pdf

Summary

The concept of this project was initially discussed in 2011 within Seafood Services Australia (SSA). The objective was to develop a draft Australian Standard for Responsible Fishing on commercial fishing vessels by building upon the many Codes of Practice (CoPs), environmental management systems (EMS) and occupational health and safety, food safety and other regulations in Australia. The intended outcome was to improve public perception of the commercial fishing industry. The standard would either be an industry standard or elevated to an Australian Standard. FRDC approved the project in February 2013.
Following the closure of SSA in mid-2013, the project was novated to a new Principal Investigator at the end of the same year. A review of project objectives was undertaken within the context of other FRDC and international initiatives related to certification and
standardisation, including the UK Responsible Fishing Vessel Scheme, Oceanwatch Master Fishers Programme and the South Australian Rock Lobster Clean and Green standard. The review led to a change of project focus to develop code of practice templates for fisheries that were compliant with domestic and international regulatory and normative frameworks. Discussion with stakeholders indicated that there was little demand for an Australian Responsible Fishing Standard, but the templates could be a basis for the development of a standard in the future if required.
View Filter

Research

Organisation