5 results
Industry
PROJECT NUMBER • 2015-239
PROJECT STATUS:
COMPLETED

Oysters Australia IPA: Pacific Oyster Mortality Syndrome - resistant Oyster breeding for a sustainable Pacific Oyster Industry in Australia

This report describes selective breeding research and extension conducted by Australian Seafood Industries Pty Ltd (ASI) to assist the Pacific Oyster industry’s recovery from an outbreak of Pacific Oyster Mortality Syndrome (POMS) in Tasmania in 2016. The report also describes research to...
ORGANISATION:
Australian Seafood Industries Pty Ltd (ASI)
Blank
PROJECT NUMBER • 2018-197
PROJECT STATUS:
COMPLETED

Developing FRDC’s 2020-2025 RD&E Plan

This report covers the second of two CSIRO contributions to the project FRDC 2018-197. This project was reviewing FRDC research objectives through a process that developed alternative scenarios of possible futures relevant to Australian fisheries. Discussed here is the development of a...
ORGANISATION:
Fisheries Research and Development Corporation (FRDC)
Environment
PROJECT NUMBER • 2014-028
PROJECT STATUS:
COMPLETED

Mud cockle (Katelysia spp.) stock enhancement/restoration: practical implementation and policy evaluation

This study was conducted to restore the Mud Cockle population in the Section Bank of Port River, South Australia, which had drastically decreased due to commercial fishing. Mud Cockles are important not only for commercial purposes but also for stabilizing sediment and reducing turbidity in the...
ORGANISATION:
SARDI Food Safety and Innovation
SPECIES

Trials of oceanographic data collection on commercial fishing vessels in SE Australia

Project number: 2022-007
Project Status:
Completed
Budget expenditure: $347,802.00
Principal Investigator: Ian Knuckey
Organisation: Fishwell Consulting Pty Ltd
Project start/end date: 31 Jul 2022 - 30 May 2025
Contact:
FRDC

Need

Australia’s fisheries span a large area of ocean. Australia has the world’s third largest Exclusive Economic Zone (EEZ), with an area of over 8 million km2. This zone contains mainly Commonwealth managed fisheries, with State jurisdictions mainly in coastal waters up to the 3 nautical mile limit. Australia's total wild-catch fisheries gross value of production is $1.6 billion, of which 28% is from Commonwealth fisheries and 72% from the smaller coastal inshore fisheries managed by state jurisdictions. The wildcatch fisheries sector employs about 10,000 people across Australia (https://www.awe.gov.au/abares/research-topics/fisheries/fisheries-and-aquaculture-statistics/employment).

The commercial fishing industry has a network of thousands of vessels working mainly in inshore waters around Australia. They can supply a potential platform for extensive and fine scale spatial and temporal monitoring of the waters of the continental shelf (0-1200m), from the surface to the ocean floor. Given that their livelihoods depend on it, they have a keen understanding of oceanographic conditions with respect to fish behaviour, feeding and spawning and the various oceanographic factors that may influence this. In some fisheries (e.g. surface tuna longlining), fishers eagerly seek and use readily available fine-scale oceanographic data such as sea surface temperature and sea level, to improve their targeting and achieve higher resultant catch rates. For many other fisheries, however, it is the fine-scale sub-surface oceanographic conditions (feed layers, thermoclines, temperature at depth etc) that have a critical influence on their fishing dynamics. Unfortunately, this type of oceanographic data is far less readily available. Although fishers and scientists know these factors are important, the time series of fine scale spatial and temporal data relevant to fishery operations is not available to include in stock assessments. As a result, it is often assumed that variations in catch rates reflect changing stock abundance, when it may simply be a result of changing oceanographic conditions.

Marine scientists collect a vast range of oceanographic data using satellites, subsurface drones, and static and drifting buoys. Sea surface data, however, is much easier and more cost-effective to collect at high spatial and temporal resolutions than sub-surface data. Hence, understanding of sub-surface oceanographic conditions tends to be derived from modelling more than actual measurement. This may be sufficient at a wide-scale global or continental level, but it is not adequate at the fine-scale spatial and temporal resolution required for fisheries management.

The use of commercial fishing gear as a research data platform has been increasing in popularity internationally (https://www.frontiersin.org/articles/10.3389/fmars.2020.485512/full). A number of groups in Europe have been doing this for a decade (e.g Martinelli et al 2016), and New Zealand are also now involved (https://www.moanaproject.org/te-tiro-moana). However, this approach has yet to be implemented in Australia in a coordinated way. In particular, our approach dictates open access data served through the IMOS Australian Ocean Data Network (www.aodn.org.au) that can be collected once and used many times.

In this project we intend to instrument seafood sector assets (e.g Trawl Nets, longlines, pots) with fit-for- purpose quality-controlled (QC'd) temperature/pressure sensors to increase the sub-surface temperature data coverage around Australia’s shelf and upper slope regions (0-800m) at low cost. Not only will this assist in the collection of data at relevant spatial and temporal scales for use by fishers, but it will also provide a far more extensive level of QC’d data to oceanographers in near real time (NRT) for evaluation and ingestion into data-assimilating coastal models that will provide improved analysis and forecasts of oceanic conditions. In turn, this will also be of value to the fishing sector when used to standardise stock assessments.

Martinelli, M., Guicciardi, S., Penna, P., Belardinelli, A., Croci, C., Domenichetti, F., et al. (2016). Evaluation of the oceanographic measurement accuracy of different commercial sensors to be used on fishing gears. Ocean Eng. 111, 22–33. doi: 10.1016/J.OCEANENG.2015.10.037

Objectives

1. Effective installation and operation of oceanographic data collection equipment on network of commercial fishing vessels using a range of common fishing gear
2. To provide QC’d data direct to fishers in near real-time to assist in habitat characterisation and the targeting of effort
3. To cost-effectively increase the spatial resolution of sub-surface physical data collected in Australia’s inshore, shelf, upper-slope, and offshore waters by fitting commercial fishing equipment from a variety of gear types with low-cost temperature/pressure sensors
4. To make the QC’d temperature depth data publicly available through the IMOS-AODN portal for uptake and use in ways that support safe maritime operations the sustainable management of marine resources, and improves understanding of drivers of change.

Article

Final Report • 2024-11-07 • 7.45 MB
2022-007-DLD.pdf

Summary

Working with IMOS and oceanographers at the University of New South Wales (UNSW), Fishwell Consulting engaged its established networks across the Australian commercial fishing community to harness the capacity of commercial fishing vessels in environmental data acquisition. Deployment of temperature/depth sensors on commercial fishing vessels was shown to augmentand complement more expensive data collection platforms (e.g. ocean gliders, remote operated vehicles, Argo floats, dedicated research vessels) to provide much needed sub-surface temperature data to improve ocean circulation models and forecasting capacity. In proof-of-concept trials conducted over twelve months (from May 2023), more than 30 fishing vessels and their fishing gear were equipped with temperature sensors and data transmission equipment. These trials yielded more than 2.8 million data points from the sea surface to 1,214m depth considerably expanding existing data records. In particular, waters previously poorly observed, including the Great Australian Bight, Joseph Bonaparte Gulf, and the Gulf of Carpentaria, yielded valuable sub-surface temperature data.
People
PROJECT NUMBER • 2020-111
PROJECT STATUS:
COMPLETED

Accelerating the adoption of digital technology on Queensland prawn farms

The Prawn Farmers Digital Skills Hub is free and available at the CQU website link. The hub will provide the Australian prawn farming industry with access to education and training in the digital skills required to accelerate the adoption of current and emerging technologies. The Prawn Farmers...
ORGANISATION:
Australian Prawn Farmers Association (APFA)