80 results
People
Industry
PROJECT NUMBER • 2001-033
PROJECT STATUS:
COMPLETED

Enhancement of the NSW blacklip abalone fishery using hatchery produced seed

This project is a revision of FRDC Project 2001/033 which was originally titled Enhancement of the NSW blacklip abalone fishery using hatchery produced seed. The original project included a significant cash contribution from the NSW Abalone Fishing Industry but unfortunately after FRDC approved the...
ORGANISATION:
Department of Primary Industries and Regional Development (NSW)
Environment
PROJECT NUMBER • 1993-102
PROJECT STATUS:
COMPLETED

Interactions between the abalone fishery and sea urchins in NSW

A sampling method was developed to quantify changes in the abundance of abalone on reefs in NSW from Port Stephens to the Victorian border. The method is based on the repeated sampling of the same, fixed areas and has been used each year since 1994 to provide indices of the relative abundance of...
ORGANISATION:
Department of Primary Industries and Regional Development (NSW)
Environment

Tactical Research Fund: industry-extension of acoustic release technology for at-call access to submerged head-gear in the NSW rocklobster fishery

Project number: 2012-504
Project Status:
Completed
Budget expenditure: $73,476.10
Principal Investigator: Geoff Liggins
Organisation: Department of Primary Industries and Regional Development (NSW)
Project start/end date: 2 Sep 2012 - 1 Sep 2013
Contact:
FRDC

Need

The existing FRDC-funded project "Study of ghost fishing in the NSW rock lobster fishery" (FRDC project 2007/038; Final report due November 2012) has demonstrated that lost lobster traps continue to catch and accumulate lobsters, resulting in morbidity/mortality. Traps may be lost due to cut-off of head-gear by commercial shipping or recreational vessels, through vandalism or interactions with marine creatures (e.g. cetaceans). Loss of traps and lobsters may also result from theft. One strategy for reducing the potential for cut-offs, ghost-fishing and theft that was examined in FRDC project 2007/038 was the use of acoustic release technology that would privide fishers with "at-call" access to sub-surface head-gear. The Desert Star ARC-1XD system was extensively tested and trialled in experiments that involved commercial fishing on the mid and outer continental shelf off NSW.

The 2 commercial fishers who were involved in these experiments (Mr Ron Firkin and Mr Scott Westley) were so impressed with the performance of the acoustic system and its potential advantages for their businesses that they have made substantial investments in the technology. Both have since successfully used the system for commercial fishing in its "portable" configuration (i.e. running off batteries but not integrated with their vessel's power system and onboard electronics). They have required and continue to require considerable assistance from NSW DPI staff to set-up, use the system and problem-solve. There is now an immediate need to encourage and support this intial phase of commercial use of the system by these pioneering fishers and to provide the infrastructure for the necessary training and support for fishers who elect to invest in this technology in the future.

Objectives

1. Install Desert Star ARC-1XD acoustic release system and integrate with on-board electronics on at least 3 vessels in the NSW lobster fishery
2. Provide training and support in the use and maintenance of the system for fishers who adopt this technology in 2012-13
3. Produce documentation (manuals, diagnostic & problem-solving tools) covering intallation, use and maintenance of the system
4. Broker changes/improvements to the acoustic release system's hardware, firmware and software with the manufacturer
5. Monitor the performance of acoustic release systems implemented in the NSW lobster fishery

Final report

Authors: Dr Geoffrey W. Liggins Marcus E. Miller Giles Ballinger
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Final Report • 2020-08-01 • 1.11 MB
2012-504-DLD.pdf

Summary

Acoustic release systems were purchased by 3 fishing businesses but installation proceeded for only 2 of these businesses, on vessels fishing out of Sydney and Jervis Bay. Installation on the vessel Seeking, working out of Jervis Bay, was a permanent installation, with full integration with the vessels power supply and electronics (GPS-chart-plotter). The installation on the vessel Babs, operating out of Botany Bay Sydney, involved non-fixed (portable) components of the surface station and was not integrated with the vessel’s power supply or GPS-chart-plotter. Training and support was provided through meetings and discussions with the fishers in their homes, workshops, aboard their vessels in port and at sea when deploying and retrieving gear. An operations manual and user guide was developed to provide fishers with a guide to installation options, routine use, problem-solving and maintenance. After-market modifications were made to the ARC-1XDf release units to provide increased protection for key components from physical damage. Based on feedback regarding our specific requirements, the manufacturer made several modifications to system hardware, the firmware within the release units and the system control software.
Environment
Environment
PROJECT NUMBER • 2016-020
PROJECT STATUS:
COMPLETED

Spatial management within the NSW Ocean Trawl Fishery

The NSW Department of Primary Industries-Fisheries has outlined the results of a four-year trawl survey (2017-2020) aimed at evaluating spatial management provisions within the NSW Ocean Trawl Fishery (OTF) and the potential for these to be adapted to deal with tactical challenges associated with...
ORGANISATION:
Department of Primary Industries and Regional Development (NSW)
View Filter

Organisation